Scope of application
Condensate with oil and without oil
Characteristics
- Safe condensate drainage without unnecessary pressure losses
- Simple installation
- No control or preventive maintenance
- Clear service indication via LED including service indicator
- Self-monitoring via integrated alarm system
- Capacitive measuring system without wear and tear and no moving parts
- Minimal maintenance, only one “Service Unit “Potential-free alarm contact
- Test key for function control
Condensate collection tank made of cast aluminium. Internal and external KTL coating (cataphoretic immersion painting) of high quality.
The integrated Service-Unit is made of corrosion-resistant aluminium and plastic.
In the event of condensate drainage failures, an integrated monitoring system with potential-free alarm contact will give and transmit the warning.
Technical data
| Compressor flow rate )* | 10 m3/min |
| Refrigerant dryer capacity)* | 20 m3/min |
| Filter capacity)* | 100 m3/min |
| Operating pressure min./máx. | 0,8/16 bar (g) |
| Housing material | Plastic, Aluminium (KTL) |
| Membrane material | AU |
| Ambient temperature | +1°C/+60°C |
| Weight | 1,65 kg |
| Condensate inlet | G1⁄2 [optional: adapter NPT] |
| Condensate outlet | G1⁄2 (13 mm nozzle) |
| Voltage (standard) U rated | 95…240 VAC ±10% (50…60 Hz) / 100…125 VDC ±10% |
|
Tension variants |
24…48 VAC ±10% (50…60 Hz) / 18…72 VDC |
|
Absorbed power |
P=0,6…3VA(W) |
|
Type of protection |
IP 67 |
|
Cable section |
0,75…2,5 mm2 (AWG 14…20) |
|
Protection by fuse |
recommended 0.5 A / mt |
) * referring to moderate climate (for example, Europe)
