Field of application

Condensate with and without oil, low aggressiveness

Características

  • Evacuación segura del condensado sin pérdidas de presión innecesarias
  • Instalación sencilla
  • No necesita control ni mantenimiento preventivo
  • Indicación clara de servicio por medio de LED
  • Autovigilancia gracias a sistema de alarma integrado
  • Sistema de medición capacitivo sin desgaste y sin piezas móviles
  • Estructura compacta y robusta
  • Contacto de alarma sin potencial
  • Tecla de prueba para controlar el funcionamiento

Carcasa de fundición de aluminio resistente a medios salinos, completamente chorreada con granalla de vidrio. Recubrimiento endurecedor protector de gran calidad en interior y exterior.En caso de que se produzcan averías en la evacuación de condensados, un sistema de vigilancia integrado con contacto de alarma libre de potencial dará y transmitirá el aviso.

  • Safe condensate drainage without unnecessary pressure loss
  • Simple installation
  • No inspection or preventive maintenance
  • Clear service indication by means of LED
  • Self-monitoring by means of integrated alarm system
  • Capacitive measuring system without wear and tear and without moving parts
  • Compact and robust design
  • Potential-free alarm contact
  • Test key for function control

Salt-resistant cast aluminium housing, completely sandblasted with glass shot. In the event of condensate drainage failures, an integrated monitoring system with potential-free alarm contact will give and transmit the warning.

Technical data

Compressor flow rate )* 30 m3/min
Refrigerant dryer capacity )* 60 m3/min
Filter capacity )* 300 m3/min
Operating pressure min./max. 0,8/16 bar (g)
Housing material Aluminium, hard coated
Membrane material AU
Ambient temperature +1°C/+60°C
Weight 2 kg
Condensate inlet 2 X G1/2 [optional: NPT thread]
Condensate outlet 1 X G1⁄2; tube holder nozzle = 13 mm
Rated voltage (standard) U 230(±10%) VAC; 50 – 60 Hz

Tension variants

200,115, 100,48,24 Vac;24 Vdc

Absorbed power

< 8,0 VA (AC/~) / W (DC/–)

Type of protection

IP 65

Cable section

recommended 3 X 0.75 mm2

Protection by fuse

recommend. for AC1 A slow / mandatory for DC1 A slow
Condensate inlet

< 250 Vac / < 1,0 A;> 5 Vdc / > 10 mA

) * referring to moderate climate (for example, Europe)

REQUEST PRODUCT INFO